Heater

1. Fan Switch: Has four positions: Off, Low, Medium, and High speeds. Use when operating heat or defrost system.

2. Temperature Control Lever: Use to maintain temperature at any desired level by sliding in or out (maximum heat position is all the way in). Use when operating heater or defroster.

3. Selector Lever: A three position lever used to control direction of air flow.

"Off" extreme left: Move both the selector lever and the fan switch to their off positions to turn off the entire heating system.

"Heat" middle position: When the engine temperature gauge pointer reaches the first mark, place the selector lever in the heat position and slide the temperature control lever all the way in. This directs heated air into the passenger area (some air is directed onto the windshield to prevent fogging). Comfort is maintained by adjusting the temperature control leverand fan speed. To provide maximum comfort in the rear passenger area, keep windows closed and keep the fan switch on high.

Be sure the air intake, located outside the car below the windshield, is free of snow or other obstructions and the warm-weather ventilation knobs are pushed in, when operating the system.

© Arthur Reichardt 2002

This site is for personal use only, I do not guarantee that the information on this website is correct. If you find a mistake on this website, or just wrong information, just e-mail me.

[ Home ] [ Vinyl Roof ] [ Charger 500 ] [ Engine Line-up ] [ Transmission Line up ] [ Brakes ] [ Charger Daytona ] [ Wheels, Tire Options ] [ Production Figures ] [ (New) Prices ] [ Exterior Colors ] [ Owners Manual ]

You're visitor number:

(Since the 6th of March, 2002).